Installation Guidelines, Tools and Materials Needed

goAWall is a perfect way to break up a large room, to emphasize a particularly great architectural feature, liven’ up a wall, or to instill a sense of the extraordinary in an otherwise ordinary space. It’s the wall you notice first when you enter a room – due to its distinct color, texture or other eye-catching detail. An accent wall provides an immediate ‘draw’ and can be used in just about any room, including the kitchen, hallway, fireplace, bathroom, shelves, around windows or on the ceiling. Accent walls are truly a flexible and inexpensive way to perk up a dull space.

Included: Wood Planks (Each box contains 10 boards equaling 18 square feet)

Suggested Tools

  • Pencil
  • Tape measure
  • Miter Saw
  • Hammer
  • Jig Saw (for cutting around outlets or notching)
  • Nail Gun (i.e.18-gauge Brad Nailer or equivalent)

  • Nails

  • Stud Finder

  • Safety Equipment

* Table Saw or equivalent (may not be necessary)

goAWall products are made from real wood, not a manufactured imitation. Wood is a natural resource and will often contain naturally occurring variations in color, texture, grain patterns, mineral streaks, pinholes and knots within the raw wood itself. Boards can vary in appearance from piece to piece and even within a piece. The opposite face and edges can differ from the featured face in texture, coloring, and other characteristics unless otherwise noted. A mixed colored box’s colors range from light to dark gray tones, light to dark brown tones and charcoal to black tones. A mixed gray box includes light, medium and dark grays.

ADVISORY: In wet and high moisture areas, i.e. kitchen back splashes, bathrooms or in direct contact with water and/or humidity, we recommend sealing the product with a protective sealant. We prefer Agra Life Lumber Seal as a VOC Free option.

 

To the best of our knowledge this information is accurate, however, due to the uniqueness of products grown in nature, it is the sole responsibility of the installer to select the appropriate product for any given installation and site condition. We recommend that the installer check and follow local building codes and apply best practices in handling and installing goAWall products. Additionally, installers should follow manufacturer’s recommended safety, application and maintenance instructions when using finish and fastening products. Any guidelines provided by goAWall below are only suggestions and goAWall makes no representations or warranties regarding the applicability of your specific situation. The consumer assumes all risks and liability associated with the construction or use of this product.